设计描述:
文档包括:
说明书一份,64页,月21000字
CAD版本图纸全套
设计(论文)的主要内容与要求:
一、 建筑设计
1.总平面图
2.各层平面图
3.剖面图(1~2个)
4.立面图(1~2个)
5.节点详图(1~3个)
6.简要设计说明
二、 结构设计
1.根据房屋基本情况确定结构设计基本参数
2.进行结构平面布置
3.手算一榀代表性框架
3.1选取计算框架并确定该榀框架在各种作用下的计算简图
3.2各种荷载工况下的内力计算
竖向荷载(恒、活)作用下的内力计算采用分层法;水平荷载(风、地震)下的内力计算采用D值法。
3.3控制截面内力计算、内力组合、抗震组合内力级差调整
3.4框架梁、柱截面设计及节点核心区截面抗震验算
4.基础设计
5.楼梯设计
6.计算机分析与设计
使用中国建筑科学研究院研制的PMCAD建立结构整体计算模型,对标准层及屋面层楼板进行配筋;
用PK对手算框架进行建模分析,对比分析手算结果和PK结果;
用TAT进行结构整体空间分析与设计。
7.整理计算书,绘制结构施工图
三、 施工组织设计
1.确定施工方案
2.编排施工进度计划,绘制横道图
3.施工现场平面布置
摘要
本设计主要进行了结构方案中框架5轴框架的抗震设计。在确定框架布局之后,先进行了层间荷载代表值的计算,接着利用顶点位移法求出自振周期,进而按底部剪力法计算水平地震荷载作用下大小,进而求出在水平荷载作用下的结构内力(弯矩、剪力、轴力)。接着计算竖向荷载(恒载及活荷载)作用下的结构内力,找出最不利的一组或几组内力组合。 选取最安全的结果计算配筋并绘图。此外还进行了结构方案中的室内楼梯的设计并完成了平台板,梯段板,平台梁等构件的内力和配筋计算及施工图绘制。
关键词: 框架,结构设计,抗震设计,施工组织设计
ABSTRACT
The purpose of the design is to do the anti-seismic design in the longitudinal frames of axis5. When the directions of the frames is determined, firstly the weight of each floor is calculated .Then the vibrate cycle is calculated by utilizing the peak-displacement method, then making the amount of the horizontal seismic force can be got by way of the bottom-shear force method. The seismic force can be assigned according to the shearing stiffness of the frames of the different axis. Then the internal force (bending moment, shearing force and axial force ) in the structure under the horizontal loads can be easily calculated. After the determination of the internal force under the dead and live loads, the combination of internal force can be made by using the Excel software, whose purpose is to find one or several sets of the most adverse internal force of the wall limbs and the coterminous girders, which will be the basis of protracting the reinforcing drawings of the components. The design of the stairs is also be approached by calculating the internal force and reinforcing such components as landing slab, step board and landing girder whose shop drawings are completed in the end.
Keywords : frames,structural design,anti-seismic design
目 录
中文摘要…………………………………………………………………………………………Ⅰ
英文摘要…………………………………………………………………………………………Ⅱ
一、设计资料……………………………………………………………………………………1
二、结构布置及结构计算简图的确定…………………………………………………1
三、荷载计算……………………………………………………………………………………3
四、内力计算…………………………………………………………………………….…… 10
五、内力组合……………………………………………………………………………………56
六、截面设计……………………………………………………………………………………56
七、框架节点核心区抗震验算…………………………………………………………56
八、基础设计………………………………….………………………………………………58
九、板式楼梯设计…………………………………………………………………….…… 60
参考文献…………………………..……………………………………………………….…… 63
附录………………………………………………………………………………………………..
附录一:内力组合表………………………………………………………………………...…
附录二:梁配筋表…………………………………………………………………………...…
附录三:柱配筋表…………………………………………………………………………...…
附录四:KJ-3内力图………………………………………………………………………..…
附录五:各层配筋简图……………………………………………………………………...
|