小林设计素材网 客服QQ:178308054 Email:178308054@qq.com 机械设计资料 | 相信专业,相信小林 | 小林机械资料网竭诚为您服务!
首页 | 工艺夹具 | 数控编程 | 注塑模具 | 冲压模具 | 机械机电 | 土木工程 | 采矿通风 | 其他专业 | 购买流程 | 信誉说明 | 付款账号 | 加盟
     
您现在的位置: 主页 > 采矿通风 >
设计名称
陈四楼煤矿1.5 Mta新井设计
设计编号
x097
设计软件
AutoCAD, Word
包含内容
见右侧图片
说明字数
62000字
图纸数量
见右侧图片
推荐指数
较高
价格:
价格优惠中
整理日期
9.27
整理人
小林
购买流程
<查看如何购买本站设计>
设计简介

设计描述:


文档包括:

设计说明书1份,共135页,约62000字左右


CAD版本图纸,共5张


毕业设计任务书

毕业设计题目:陈四楼煤矿1.5 Mt/a新井设计

毕业设计专题题目:浅析煤层开采对地面桥梁的影响

摘  要

本设计包括三个部分:一般部分、专题部分和翻译部分。
一般部分为陈四楼1.5 Mt/a新井设计。陈四楼煤矿位于河南省永城市西北郊区,交通较为便利。井田倾向(东西)长约4.40 km,走向(南北)长约8.7km,井田总面积约为34.2 km2。主采煤层为二2号煤层,平均倾角为10°,煤层平均厚度为3.25 m。井田工业储量为160.66Mt,矿井可采储量115.67 Mt 。该矿井服务年限为59.32 a,涌水量不大,矿井正常涌水量为894 m3/h,最大涌水量为1200 m3/h。矿井瓦斯涌出量较低,为低瓦斯矿井。
根据井田地质条件,提出四个技术上可行的开拓方案。方案一:立井单水平加暗斜井开拓;方案二:立井单水平上下山开拓;方案三:立井两水平开拓(运输大巷布置在岩层中,立井直接延深);方案四:立井两水平开拓(运输大巷布置在煤层中,立井直接延深)。通过技术经济比较,最终确定方案三为最优方案。一水平标高-540 m,二水平标高-760 m。
井田为立井两水平开拓;综采一次采全高采煤法;矿井通风方式为两翼对角式。
矿井年工作日为330d,工作制度为“四六”制。
一般部分共包括10章:1.矿区概述及井田地质特征;2.井田境界和储量;3.矿井工作制度及设计生产能力、服务年限;4.井田开拓;5.准备方式-带区巷道布置;6.采煤方法;7.井下运输;8.矿井提升;9.矿井通风与安全技术;10.矿井基本技术经济指标。
专题部分的题目为浅析煤层开采对地面桥梁的影响,主要针阐述了地表变形和对桥梁结构的影响,进而从煤层开采方面提出了一些解决措施。
翻译的内容为液压支架的静力分析和模态分析,英文题目为:The Structure Statics Analysis and Transient Dynamics Analysis of Hydraulic Support

关键词:陈四楼煤矿; 立井; 带区布置; 综采一次采全高采煤法; 两翼对角式

 
ABSTRACT
This design includes of three parts: the general part, special subject part and translated part.
 The general part is a new design of Chensilou mine. Chensilou mine lines in north-west of Yongcheng in Henan province. The traffic of road and railway is  convenience to the mine. The width of the minefield is 4.40 km ,the width is about 8.70 km,well farmland total area is 34.20km2.The two is the main coal seam, and its average dip angle is 10degree. The thickness of the mine is about 3.25 m in all. The proved reserves of the minefield are 206.49 Mt. The recoverable reserves are 125.13 Mt. The designed productive capacity is 1.5 Mt percent year, and the service life of the mine is 64.17 years. The normal flow of the mine is 894 m3 percent hour and the max flow of the mine is 1200 m3 percent hour. The mineral well gas gushes the deal lower, for low gas mineral well.
Mine geological conditions under the proposed development schemes for the four technically feasible. Option One: Single-level plus dark inclined shaft development; Option Two: One level down the open shaft; Option Three: Vertical two-level development (transport arranged in rocks in the roadway, a direct extension shaft deep); program four: two horizontal shaft development (Transportation Roadway layout in coal, direct extension shaft deep). Through technical and economic comparison, the final three as the best program to determine the program. A level elevation of -650 m, -850 m elevation of the second level
Mine shaft of two levels to explore; fully mechanized mining overall high-mining method; mine ventilation for the two wings on the diagonal.
 The working system “four-six” is used in the Chensilou mine. It produced 330 d/a.
This design includes ten chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and working system of mine; 4.development engineering of coalfield; 5.The layout of panels; 6. Preparation method - with area tunnel arrangement; 7. Transportation of the underground; 8.The lifting of the mine; 9. The ventilation and the safety operation of the mine; 10.The basic economic and technical norms.
 Thematic part of the topic of coal mining on the ground of the bridge, the main pin surface deformation and described the impact of the bridge structure, and then put forward from a number of coal mining solutions
Translation part of main contentses is The Structure Statics Analysis and Transient Dynamics Analysis of Hydraulic Support.English topic is: The Structure Statics Analysis and Transient Dynamics Analysis of Hydraulic Support
.
Keywords : Chensilou coal;  shaft;  with a mere arrangement;  fully mechanized mining overall high-mining method;  wings diagonal


 
目  录

一般部分
1 矿区概述及井田地质特征 3
1.1 矿区概述 ?3
1.1.1矿区地理位置 3
1.1.2自然地理概况 3
1.1.3矿区开发历史及生产建设规划 3
1.1.4矿井建设的外部条件 3
1.2 地质特征 3
1.2.1地层 3
1.2.2地质构造 3
1.2.3水文地质 3
1.3 煤层特征 3
1.3.1煤层 3
1.3.2 煤质 3
1.3.3 开采技术条件 3
1.3.4勘探程度及存在问题 3
2 井田境界和储量 3
2.1 井田境界 3
2.2 矿井工业储量 3
2.2.1构造类型 3
2.2.2煤层稳定类型 3
2.2.3矿井工业储量 3
2.3 矿井可采储量 3
2.3.1井田边界保护煤柱 3
2.3.2工业广场煤柱 3
2.3.3井筒保护煤柱 3
2.3.4断层保护煤柱 3
2.3.5大巷保护煤柱 3
2.3.6矿井设计可采储量 3
3. 矿井工作制度、设计生产能力及服务年限 3
3.1 矿井工作制度 3
3.2矿井设计生产能力及服务年限 3
3.2.1确定依据 3
3.2.2矿井设计生产能力 3
3.2.3矿井服务年限 3
3.3井型校核 3
4 井田开拓 3
4.1 井田开拓的基本问题 3
4.1.1确定井筒形式、数目、位置及坐标 3
4.1.2工业场地的位置 3
4.1.3开采水平的确定及带(采)区划分 3
4.1.4方案比较 3
4.2 矿井基本巷道 3
4.2.1井筒 3
4.2.2开拓巷道 3
5 准备方式——带区巷道布置 3
5.1煤层地质特征 3
5.1.1带区位置 3
5.1.2带区煤层特征 3
5.1.3煤层顶底板岩石构造情况 3
5.1.4水文地质 3
5.1.5地质构造 3
5.1.6地表情况 3
5.2 带区巷道布置及生产系统 3
5.2.1带区准备方式的确定 3
5.2.2带区巷道布置 3
5.2.3带区生产系统 3
5.2.4带区内巷道掘进方法 3
5.2.5带区生产能力及采出率 3
5.3带区车场选型设计 3
6 采煤方法 3
6.1 采煤工艺方式 3
6.1.1 采煤方法的选择 3
6.1.2 回采工作面长度的确定 3
6.1.3 工作面的推进方向和推进度 3
6.1.4 综采工作面的设备选型及配套 3
6.1.5 各工艺过程注意事项 3
6.1.6 工作面端头支护和超前支护 3
6.1.7循环图表、劳动组织、主要技术经济指标 3
6.1.8 综合机械化采煤过程中应注意事项 3
6.2回采巷道布置 3
6.2.1回采巷道布置方式 3
6.2.2回采巷道参数 3
7 井下运输 3
7.1概述 3
7.1.1矿井设计生产能力及工作制度 3
7.1.2煤层及煤质 3
7.1.3运输距离和辅助运输设计 3
7.1.4矿井运输系统 3
7.2带区运输设备选择 3
7.2.1设备选型原则: 3
7.2.2带区运输设备选型及能力验算 3
7.3大巷运输设备选 3
7.3.1主运输大巷设备选择 3
7.3.2辅助运输大巷设备选择 3
7.3.3运输设备能力验算 3
8 矿井提升 3
8.1矿井提升概述 3
8.2主副井提升 3
8.2.1主井提升 3
8.2.2副井提升设备选型 3
9 矿井通风及安全 3
9.1矿井地质、开拓、开采概况 3
9.1.1矿井地质概况 3
9.1.2开拓方式 3
9.1.3开采方法 3
9.1.4变电所、充电硐室、火药库` 3
9.1.5工作制、人数 3
9.2矿井通风系统的确定 3
9.2.1矿井通风系统的基本要求 3
9.2.2矿井通风方式的选择 3
9.2.3矿井通风方法的选择 3
9.2.4带区通风系统的要求 3
9.2.5带区通风方式的确定 3
9.3矿井风量计算 3
9.3.1通风容易时期和通风困难时期采煤方案的确定 3
9.3.2各用风地点的用风量和矿井总用风量 3
9.3.3风量分配 3
9.4矿井阻力计算 3
9.4.1计算原则 3
9.4.2矿井最大阻力路线 3
9.4.3计算矿井摩擦阻力和总阻力: 3
9.4.4两个时期的矿井总风阻和总等积孔 3
9.5选择矿井通风设备 3
9.5.1选择主要通风机 3
9.5.2电动机选型 3
9.6安全灾害的预防措施 3
9.6.1预防瓦斯和煤尘爆炸的措施 3
9.6.2预防井下火灾的措施 3
9.6.3防水措施 3
10 设计矿井基本技术经济指标 3
参考文献 3
专题部分
浅析煤层开采对地面桥梁的影响 3
1前言 3
2开采深陷规律 3
2.1开采沉陷的基本规律 3
2.2采空区稳定性评价 3
3桥梁结构的分析 3
3.1地表移动与桥梁基础的关系 3
3.2桥梁抗不均匀沉降的分析 3
3.3井下开采对桥梁安全的保护措施 3
4小结 3
5参考文献 3
翻译部分
英文原文 3
The Structure Statics Analysis and Transient Dynamics Analysis of Hydraulic Support 3
I.INTRODUCTION 3
II.THE STRUCTURE STATICS ANALYSIS OF HYDRAULIC SUPPORT 3
III. THE TRANSIENT DYNAMICS ANALYSIS OF HYDRAULIC SUPPORT 3
IV. CONCLUSION 3
REFERENCES 3
中文译文 3
液压支架的静力分析和模态分析 3
1引言 3
2液压支架的结构静力分析 3
3液压支架的瞬态分析 3
4总结 3
参考文献 3
致  谢 3

部分图纸
截图
说明:
如需了解本设计的具体详细信息请联系本站客服,说明看哪个设计(编号)哪个详细部分,我们将远程或截图给您观看.
机械毕业设计|论文
[要求PR≥2,百度收录≥1000页;联系QQ:178308054]
  • pass',
  • 最新选题目录 - 购买流程 - 信誉说明! - 付款账号 - 帮助中心
    声明:根据《互联网传播权保护条例》本站,小林机械资料商城,所列资料均属原创者所有,仅供学习交流之用,请勿转载并做其他非法用途。
    Powered by 小林机械资料商城 © 2013-2020 All Rights Reserved. 客服QQ:178308054
    喜欢www.xiaolinbysj.com,请告诉你QQ上的5位好友,多谢您的支持! 皖ICP备2021006205号-1 辰光云统计平台